SUBSEA PRODUCTS

The ClampOn Subsea Particle Monitor is a non-intrusive sensor that detects and monitors sand in the production line.

Sand production in Oil and Gas wells is one of the most challenging factors an operator faces during production. Going subsea, safety issues in conjunction with the need to produce as much as possible per well, makes the selection of a subsea monitoring system even more important.

SUBSEA CORROSION-EROSION MONITOR

The ClampOn Subsea Corrosion-Erosion Monitor (CEM) continually monitors and quantifies changes in wall thickness over a large area of a pipeline. The non-intrusive instrument estimates the rate at which corrosion and/or erosion reduces the thickness of the pipe wall. In this way, it can provide operators with an early warning of potentially catastrophic failures before they occur. The CEM is therefore also an effective tool in helping operators comply with newer regulations regarding the need for condition monitoring.

SUBSEA PIG DETECTOR

PIG detection made easy and reliable.

The Non-intrusive ClampOn DSP PIG Detector detects and monitors when the PIG is passing the point of installation. Providing reliable information about the passage of the PIG increases pipeline integrity and produces cost savings.

SUBSEA FLOW TEMPERATURE MONITOR

Non-intrusive subsea flow temperature monitoring

The ClampOn Subsea Flow Temperature Monitor is a non-intrusive sensor that calculates and monitors the temperature of the flow medium from outside the pipe.

The ClampOn Subsea Flow Temperature Monitor can be used as a standalone temperature sensor. The instrument can be retrofitted to existing installations, for example to replace broken intrusive sensors.

SUBSEA VIBRATION DETECTOR

ClampOn Non-intrusive sensors for Subsea Vibration Monitoring.

Vibrations always start at very high frequencies and change to lower frequencies as the conditions develop. The ClampOn DSP Vibration Monitor is an ideal instrument to monitor three directional vibrations on structures and pipelines with either high frequency shear waves or low frequencies.

SUBSEA CONDITION MONITOR

ClampOn DSP Spectrum Analyzer

The Spectrum Analyzer digitizes the ultrasound from 20 to 1000 KHz, performs frequency analysis in real-time and sends the spectrum digitally to a PC where application specific algorithms can be applied and the results stored and presented.

SUBSEA LEAK MONITOR

The Non-intrusive ClampOn DSP Leak Monitor detects small and medium leaks or flow-throughs, even with low differential pressure over the measuring point on pipes and valves. The ClampOn DSP Leak Monitor has been developed with the aim of offering a product that can quantify a leak through a closed valve. The ClampOn DSP Leak Monitor is qualified as a subsea and topside monitor.